Function Parameter Description; Do Group - Monitoring Function Group - Powtran pi130 series User Manual

Chapter 5 Function parameter

5-2.Function parameter description

5-2-1.dO Group - Monitoring function group

d0 parameters group is used to monitor the inverter running status information,user
can view those information through the panel to facilitate on-site commissioning, also
read parameters group value via communication for host computer monitoring.
Parameter function code
d0.00
Actual output frequency of inverter running
d0.01
Inverter current actual setting frequency
d0.02
Inverter bus voltage value
d0.03
Actual output voltage when the inverter running
d0.04
Actual output current when the inverter running
d0.05
Actual output power when the inverter running
d0.06
Actual output torque percentage when the inverter running
d0.07
DI input terminal status is currently displayed, when it is converted into binary data,
one bit corresponds to one DI terminal input signal, 1 indicates that the input terminal
is high level signal, 0 indicates that the input terminal is low-level signal.
Bit0
DI1
Bit5
Reserved
d0.08
Running frequency
Set frequency
DC bus voltage
Inverter output voltage
Inverter output current
Inverter output power
Inverter output torque
Input terminal status
Bit1 Bit2
DI2
Bit6 Bit7
Reserved Reserved
Output terminal status
Parameter name
Bit3
DI3 DI4
Bit8
Reserved
46
Smallest unit
0.01Hz
0.01Hz
1V
1V
0.1A
0.1kW
1%
-
Bit4
DI5
Bit9
Reserved
-