Installing The Battery - Toro Z Master Professional 7000Series 74264TE Operator's Manual

1. Disengage the PTO, move the motion-control levers to
the N - position, and set the parking brake.
EUTRAL LOCK
2. Shut off the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Unlatch the seat and tilt the seat up.
4. Remove the battery as shown in
Figure 53
Figure 53.
43

Installing the Battery

Note: Position the battery in the tray with the terminal posts
opposite from the hydraulic tank.
Figure 54