Table of Contents
Advertisement
Operation
Before Operation
Installing the Battery Pack
Important:
Use the battery pack only in temperatures that are within the appropriate range; refer
to
Specifications (page
1.
Ensure that the vents on the battery are clear of any dust and debris.
2.
Press down on the battery-compartment lid to open it (A of
3.
Line up the cavity in the battery pack with the tongue on the machine and slide the battery pack into the
compartment until it locks into place (B of
4.
Press down on the battery-compartment lid until it clicks into place (C of
Note:
If the battery-compartment lid does not close completely, the battery is not fully installed.
Adjusting the Handle Height
You may raise or lower the handle to a position comfortable for you.
To adjust the handle height, do the following:
1.
On both sides of the machine, rotate the handle locks (A of
2.
Adjust the position of the handle to the upper (high handle height) or lower (lower handle height) position
(B of
Figure
9).
3.
When the handle is in the desired position, rotate the handle locks back until the pin clicks to secure the
handle (C of
Figure
1. Low handle height
11).
9).
Figure
Figure
8).
Figure 8
Figure
Figure 9
2. High handle height
12
8).
Figure
8).
9).
g459227
g456084
Advertisement
Table of Contents
