Table of Contents
Advertisement
1. Left fuel tank
Using the Rollover Protection
System (ROPS)
WARNING
To avoid injury or death from rollover, keep the roll
bar in the raised locked position and use the seat
belt.
Ensure that the rear part of the seat is secured with
the seat latch.
WARNING
There is no rollover protection when the roll bar is
in the down position.
• Lower the roll bar only when absolutely
necessary.
• Do not wear the seat belt when the roll bar is
in the down position.
• Drive slowly and carefully.
• Raise the roll bar as soon as clearance permits.
• Check carefully for overhead clearances (i.e.,
branches, doorways, electrical wires) before
driving under any objects and do not contact
them.
Figure 7
2. Fuel-selector valve
1. Remove the hairpin cotters and remove the 2 pins
(Figure
9).
2. Lower the roll bar to the down position. There are 2
down positions. See
1. Full down position
3. Install the 2 pins and secure them with the hairpin
cotters
(Figure
1
3
4
1. Roll bar
2. Raised position
4. To raise the roll bar, remove the hairpin cotter and
remove the 2 pins
5. Raise the roll bar to the upright position and install the
2 pins and secure them with the hairpin cotters
9).
19
Figure
8.
Figure 8
2. Down position with bagger
installed
9).
Figure 9
3. Pin
4. Hairpin cotter
(Figure
9).
2
G004955
(Figure
Advertisement
Table of Contents
