Product Overview; Controls - Toro Z Master Professional 7000Series 74264TE Operator's Manual

Product Overview

1. Height-of-cut deck lift
pedal
2. Transport lock
3. Parking-brake lever

4. Controls

5. Motion-control lever
Controls
Become familiar with all of the controls before you start the
engine and operate the machine
1. Hour meter
2. Ignition switch
3. Fuel-selector valve
4. Audible alarm
5. Glow-plug switch
g019888
Figure 4
6. Roll bar
7. Seat belt
8. Fuel cap
9. Mower deck
10. Caster wheel
(Figure 4 and Figure
Figure 5
6. Glow-plug light
7. Engine temperature light
8. Throttle control
9. PTO switch
Hour Meter
The hour meter records the number of hours the engine has
operated. It operates when the engine is running. Use these
times for scheduling regular maintenance
Safety-Interlock Indicators
There are symbols on the hour meter and they indicate with a
black triangle that the interlock component is in the correct
position (Figure
Battery-Indicator Light
When the ignition key is initially turned to the R
for a few seconds, the battery voltage is displayed in the area
where the hours are normally displayed.
The battery light turns on when the ignition is turned on and
when the charge is below the correct operating level
6).
1. Safety-interlock symbols
5).
2. Hour meter
Throttle Control
The throttle control is variable between Fast and Slow.
Neutral-Lock Position
The N
EUTRAL
system and to determine N
Ignition Switch
This switch is used to start the mower engine and has 3
positions: S
TART
Glow-Plug Light
The glow-plug indicator light turns on when the glow-plug
button is engaged
Glow-Plug Switch
This switch activates the glow plugs and is indicated by the
glow-plug light. Hold down the glow-plug switch for 10
seconds prior to starting the machine.
16
6).
Figure 6
3. Battery light
- position is used with the safety-interlock
LOCK
position.
EUTRAL
, R , and O .
UN FF
(Figure 5).
(Figure 5).
position
UN
(Figure