Video Connector Board - HP Pavilion HDX Entertainment Series Maintenance And Service Manual

Remove the subwoofer:
1.
2.
3.
Reverse this procedure to install the subwoofer.

Video connector board

Description
Video connector board (includes cable)
Before removing the audio connector board, follow these steps:
1.
2.
3.
4.
5.
68 Chapter 4 Removal and replacement procedures
Downloaded from www.Manualslib.com
Disconnect the subwoofer cable (1) from the system board.
Remove the three Phillips PM2.5×8.0 screws (2) that secure subwoofer the to the base enclosure.
Remove the subwoofer (3).
CAUTION: When installing the subwoofer, do not overtighten the screws. Overtightening the
subwoofer screws can result in damage to the subwoofer grommets (4), which can cause a decrease
in the subwoofer performance.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
Remove the battery (see Battery on page
Remove the following components:
Hard drive (see Hard drive on page
a.
Optical drive (see Optical drive on page
b.
Keyboard (see Keyboard on page
c.
Hinge cover (see Hinge cover on page
d.
manuals search engine
36).
42)
49)
50)
52)
Spare part number
452321-001