Power Connector Led Board - HP Pavilion HDX Entertainment Series Maintenance And Service Manual

Remove the front USB board:
1.
2.
3.
Reverse this procedure to install the front USB board.

Power connector LED board

Description
Power connector LED board (includes cable)
Before removing the power connector LED board, follow these steps:
1.
2.
3.
4.
5.
Downloaded from www.Manualslib.com
Rear cover (see Rear cover on page
e.
Top cover (see Top cover on page
f.
Disconnect the front USB board cable (1) from the system board.
Remove the two Phillips PM2.5×4.0 screws (2) that secure front USB board the to the computer.
Remove the front USB board (3).
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
Remove the battery (see Battery on page
Remove the following components:
Hard drive (see Hard drive on page
a.
Optical drive (see Optical drive on page
b.
Keyboard (see Keyboard on page
c.
Hinge cover (see Hinge cover on page
d.
manuals search engine
53)
55)
36).
42)
49)
50)
52)
Component replacement procedures
Spare part number
452318-001
65