HP Pavilion HDX Entertainment Series Maintenance And Service Manual page 52

Hide thumbs Also See for Pavilion HDX Entertainment Series:

Table of Contents

Before removing the WLAN module, follow these steps:

Remove the WLAN module:

Downloaded from

www.Manualslib.com

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and

then unplugging the AC adapter from the computer.

Remove the battery (see

Battery on page

Position the computer with the front toward you.

Loosen the Phillips PM2.0×5.0 screw (1) that secures the WLAN module compartment cover to the

computer.

Lift the right side of the WLAN module compartment cover (2), swing the cover up and to the left,

and remove the cover. The WLAN module compartment cover is included in the Plastics Kit, spare

part number 448171-001.

Disconnect the WLAN antenna cables (1) from the WLAN module.

NOTE:

The main WLAN antenna cable (labeled with the number 1 or with a black band) is

connected to the WLAN module "Main" terminal. The white WLAN antenna cable (labeled with the

number 2 or with a white band) is connected to the WLAN module "Aux" terminal. Computer models

equipped with an 802.11a/b/g/n WLAN module will have an additional wireless antenna

cable (2) (labeled with the number 3 or with a yellow band). Disconnect this cable.

Remove the two Phillips PM2.5×5.0 screws (3) that secure the WLAN module to the system board.

(The edge of the module opposite the slot rises away from the computer.)

manuals search engine

36).

Component replacement procedures

Table of Contents