Advertisement
Sanitizing
§ Immediately perform Cleaning/Sanitizing procedure (according to instructions shipped with
dispenser) when Pressurized Water Sanitizing procedure is completed.
§ Only qualified technicians should attempt to service or maintain this equipment.
§ Wear rubber gloves and safety goggles (or face shield) when handling cleaner or sanitizer mixtures.
§ Use only Follett approved cleaners.
§ It is a violation of Federal law to use Sanitizing solution in a manner inconsistent with its labeling.
§ Do not use solvents, abrasive cleaners, metal scrapers or sharp objects to clean any part of the
dispenser.
1. Unplug dispenser.
2. Turn OFF water supply.
3. Depress red pressure release button to
relieve pressure.
4. Remove pre-filter bowl.
5. Install dip tube (Fig. 2).
2
Symphony Plus Pressurized Water Sanitizing Kit - No Filter
CAUTION!
Fig. 1
Fig. 2
Advertisement
