Automatic Coupler Function (Removing/Pushing); Analogue Settings; Lgb® Pulse Sequence Mode; Swiss Headlight Mode - Esu LokSound micro V4.0 Instruction Manual

Function outputs

12.3.6.2. Automatic Coupler Function (Removing/Pushing)

The LokSound V4.0 decoder is able to do the automatic decou-
pling. When you push the function button the loco drives back-
wards against the train and then removes from it again. This pro-
cedure can be influenced via three CVs.
In CV246 the speed that moves the loco will be stored (or de-
fined) (0-255). If this value is 0, the automatic coupler function
is not active.
In CV247 the time of removing is to be entered.
In CV248 the time of pushing is to be entered.
The time of removing should be higher than the time of pushing
to make sure that the loco stops in a safe distance away from
the train.
The function output of the options „pulse" or „coupler" needs
to be configurated correctly to make the automatic decoupling
work.

12.4. Analogue Settings

LokSound V4.0
LokSound micro V4.0
With the CVs 13 and 14, you can predetermine which function
buttons should be switched in analogue mode. Thus, you „simu-
late" pressing an F button. The ex works default settings switch
on the directional headlights (F0 is on!) as well as F1 (ex works
allocated to AUX1).
Analog Function Control 1
CV # F1 F2 F3
13 1 2 4
Analog Function Control 2
CV # F0(f) F0(r) F9
14 1 2 4
F4 F5 F6 F7
8 16 32 64 128
F10 F11 F12
8 16 32
12.5. LGB® Pulse Sequence Mode
LokSound V4.0
LokSound micro V4.0
It is possible to switch to pulse sequence mode for operations
with the LGB® command station and the Roco® Lokmaus I. To do
so, set bit 5 in CV 49. From now on decoder counts the number
of times the F1 button is pressed in order to activate the desired
function. Thus, it is possible to reach all function buttons by re-
peated pushing of the F1 button.

12.6. Swiss Headlight Mode

LokSound V4.0
Function mapping enables you to set many different configura-
tions. The Swiss headlight mode is a good example. We need a
Rear Headlights
yellow
green
F8
= Light on
= Light off
Front headlights
white
Figure 22: Swiss headlight mode
49