Fan Control - Crestron Prodigy System User Manual

®
Prodigy System
88 • Prodigy System: PMC2
Crestron Mobile Pro App / XPanel for Mac
To set a controlled zone's system mode with the Crestron Mobile Pro App:
1. Select the zone to be controlled as described on page 85.
2. Touch Mode until the desired setting is displayed.
NOTE: Not all modes are available for all HVAC systems.

Fan Control

A zone's fan can be set for automatic operation (Auto) or constant operation
(On). When set to AUTO, the fan will run when the system is cooling or
warming the controlled zone. When set to ON, the fan will always run. To set
a controlled zone's fan setting with the Crestron Mobile Pro App:
1. Select the zone to be controlled as described on page 85.
2. Touch Fan until the desired setting is displayed.
System User Guide – DOC. 7007B