Hold Setting; Maintenance - Crestron Prodigy System User Manual

®
Prodigy System
62 • Prodigy System: PMC2
3. To set the temperature setpoint(s) for the "Away" setting, touch
AWAY to display the away controls.
a. Set the date when the "Away" setting should stop with the k or
j buttons.
b. Select the time zone to use when the program resumes by
touching the NEXT SCHEDULE button.
c. Touch MAIN to return to the climate controls and set the desired
temperature setpoint(s). To lower the heating or cooling setpoint,
touch the j button under the setting to be changed. To raise the
heating or cooling setpoint, touch the k button under the setting
to be changed.

Hold Setting

The Hold function allows you to maintain a temperature setpoint until the
Hold function is disabled. Any changes caused by a program change are
ignored while the Hold function is enabled.
Touch HOLD to enable the Hold function. Touch RUN to disable the Hold
function and resume the set operating schedule.

Maintenance

Keep the surface of the touchscreen free of dirt, dust or other materials that
could degrade optical properties. Long-term contact with abrasive materials
can scratch the surface, which may detrimentally affect image quality.
For best cleaning results, use a clean, damp, non-abrasive cloth with any
commercially available non-ammonia glass cleaner. Bezels may not provide
a complete watertight seal. Therefore, apply cleaning solution to the cloth
rather than the surface of the touchscreen. Wipe touchscreen clean and
avoid getting moisture beneath the bezels.
Crestron PTL4
System User Guide – DOC. 7007B