Fan Control - Crestron Prodigy System User Manual

Crestron PTL4
System User Guide – DOC. 7007B
•
AUTO: In Auto mode, the thermostat allows the system to switch
between Heat and Cool automatically as needed to maintain the
setpoint temperature. On the P-TSTATRF, the display will show the
"flame" and "snowflake" icons.
To set a controlled zone's system mode with the PTL4:
1. Select the zone to be controlled as described on page 56.
2. Touch MODE until the desired setting is displayed.
NOTE: Not all modes are available for all HVAC zones.

Fan Control

A zone's fan can be set for automatic operation (Auto) or constant operation
(On). When set to AUTO, the fan will run when the system is cooling or
warming the controlled zone. When set to ON, the fan will always run. To set
a controlled zone's fan setting with the PTL4:
1. Select the zone to be controlled as described on page 56.
Climate Controls
2. Touch FAN until the desired setting is displayed.
®
Prodigy System
Prodigy System: PMC2 • 59