Volume Control Mode - Crestron Prodigy System User Manual

®
Prodigy System
128 • Prodigy System: PMC2

Volume Control Mode

The volume level of a connected room can be controlled when the room is in
the Volume Control mode. To switch to the Volume Control mode:
1. Press and hold the ROOM button of the room to be controlled for two
seconds.
•
Press j or k to change the volume in 1 dB increments.
•
Hold j or k for more than one second, to ramp the volume up
or down in 1 dB/.1 second increments.
If the maximum volume or minimum volume is reached, all front
panel LED's will blink three times.
2. Press the ROOM button again to exit the Volume Control mode.
If j or k is not pressed for 10 seconds, the PAMP-4X100 will
automatically exit the Volume Control mode.
Crestron PAMP-4X100
System User Guide – DOC. 7007B