Hold Setting - Crestron Prodigy System User Manual

Crestron XPanel
System User Guide – DOC. 7007B
c. Set the desired temperature setpoint(s). To lower the heating or
cooling setpoint, click the j button under the setting to be
changed. To raise the heating or cooling setpoint, click the k
button under the setting to be changed.

Hold Setting

The Hold function allows you to maintain a temperature setpoint until the
Hold function is disabled. Any changes caused by a program change are
ignored while the Hold function is enabled.
Click HOLD to enable the Hold function. Click RUN to disable the Hold
function and resume the set operating schedule.
®
Prodigy System
Prodigy System: PMC2 • 119