Table of Contents
Advertisement
WARNING!
Danger of electrocution!
Disconnect the fuse before
you replace the lamp.
The lamp and the lamp glass
cover can be hot.
1. Deactivate the appliance.
2. Remove the fuses from the fuse box
or deactivate the circuit breaker.
The top lamp
1. Turn the lamp glass cover
counterclockwise to remove it.
13. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
13.1 What to do if...
Problem
The oven does not heat up. The oven is deactivated.
The oven does not heat up. The clock is not set.
The oven does not heat up. The necessary settings are
The oven does not heat up. The automatic switch-off is
The oven does not heat up. The Child Lock is on.
The oven does not heat up. The door is not closed cor-
The oven does not heat up. The fuse is released.
The lamp does not operate. The lamp is defective.
The display shows F111.
2. Clean the glass cover.
3. Replace the lamp with a suitable 300
4. Install the glass cover.
Possible cause
not set.
activated.
rectly.
The plug of the core tem-
perature sensor is not cor-
rectly installed into the
socket.
°C heat-resistant lamp.
Remedy
Activate the oven.
Set the clock.
Make sure that the settings
are correct.
Refer to "Automatic switch-
off".
Refer to "Using the Child
Lock".
Fully close the door.
Make sure that the fuse is
the cause of the malfunc-
tion. If the fuse releases
again and again, contact a
qualified electrician.
Replace the lamp.
Put the plug of the core
temperature sensor as far
as possible into the socket.
ENGLISH
35
Advertisement
Table of Contents
