Energy Efficiency - Electrolux EVK5840AO User Manual

36 www.electrolux.com
Problem
The display shows an error
code that is not in this ta-
ble.
Steam and condensation
settle on the food and in the
cavity of the oven.
13.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is on
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

14. ENERGY EFFICIENCY

14.1 Product Fiche and information according to EU 65-66/2014
Supplier's name
Model identification
Energy Efficiency Index
Energy efficiency class
Energy consumption with a standard load, conven-
tional mode
Energy consumption with a standard load, fan-
forced mode
Number of cavities
Heat source
Possible cause
There is an electrical fault.
You left the dish in the oven
for too long.
the front frame of the appliance cavity. Do
not remove the rating plate from the
appliance cavity.
.........................................
.........................................
.........................................
Remedy
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows the
error code again, con-
tact the Customer Care
Department.
Do not leave the dishes in
the oven for longer than 15
- 20 minutes after the cook-
ing process ends.
Electrolux
EVK5840AAX
EVK5840AOX
80.8
A+
0.85 kWh/cycle
0.59 kWh/cycle
1
Electricity