3
3.3.2
Using PageScope Light To Add Addresses
Specifying Settings for One-Touch Dialing
From the page displayed by clicking "One-Touch Dial Setting" in the menu
on the "Fax" tab, one-touch dial settings for the copier can be specified.
1
No.
2
Name
3
Destination address
4
Timer Transmission
5
[Delete] button
3-38
1
2
One-touch dial number (01 to 27)
The name of the destination for the one-touch dial setting
The address programmed for the one-touch dial setting
Depending on the type of destination, this address can be
a fax number or an e-mail address.
The send time is displayed for one-touch dial settings
specified for time transmission.
Click this button to delete the selected one-touch dial
setting.
Getting Ready
3
4
5
IF-118