Specifying The Destination Using Group Dial Keys - Konica Minolta IF-118 User Manual

4
4.4

Specifying the Destination Using Group Dial Keys

Note
The group dial setting must have already been specified.
For information on setting up group dial keys, refer to "Adding
Destinations" on page 3-32.
If at least one fax number is registered as a recipient with a group dial
key, that group dial key cannot be used with the Scan to E-mail
transmission. In this case, the message "NOT E-MAIL ADDRESS"
appears in the display.
1
Press the one-touch dial key
([01] to [27]) programmed with
the group where you want to
send the scan data.
4-12
Using Scan to E-mail Operations
IF-118