Specifications - iCharger 4010DUO User Manual

iCharger iCharger Synchronous Synchronous
iCharger iCharger Synchronous Synchronous Balance
● ● ● ● 4010DUO 4010DUO 4010DUO Special 4010DUO Special Special Features Special
1. The 4010DUO uses advanced Synchronous buck-boost DC/DC converter technology, high power, and high current
and high-performance power conversion circuit. The maximum charge power capacity up to 2000W, the maximum
charge/discharge current of channel up to 40A, and two channels in Synchronous Mode up to 70A.
2. Channel Supports 10s LiPo, Lilo, LiFe, with maximum 1.2A balance current, adopts unique balance calculation of
internal resistance correction .
3. Intelligent fan control. Sensing internal temperature via the internal temperature sensor, to thereby control the fan
speed.
4. Internal temperature protection. When the internal temperature exceeds the reduce temperature, the output power is
automatically reduced; and the charger will shut down when temperature exceeds the cut-temperature.
5. 64 parameters sets can be saved, without repeat setting when use, just import/export via SD card.
6. TFT LCD screen that provides rich information including current, voltage, power, capacity, internal resistance,
control status, time-consuming and temperature, etc.
7. Multi-discharge features: discharge-self, regenerative to input discharge, regenerative to channel discharge, and
lithium battery extra expanding discharge.
8. Support measurement for internal resistance of battery offline and online. Can measure not only the internal
resistance of the entire battery pack, but also measure the per-cell internal resistance of lithium battery.
9. The iCharger has protection for reversed polarity (input or output), input voltage/current, battery temperature,
charging capacity, time overrun and maximum power etc.
10. Supports upgrading the hardware program by USB port. The iCharger also supports the "Logview" software and
can display, plot and analyze the charge and discharge data by it. (See detail information about Logview in the
following website: http://www.logview.info)
● Appearance
Appearance Appearance P P P P arameters: Appearance arameters: arameters:
arameters:
● Net weight:
● Dimension:
● Specifications

Specifications

Specifications: : : : Specifications
● Input voltage range:
● Maximum input current limit:
● Maximum charge/discharge current:
● Maximum charge power capacity:
● Maximum discharge power capacity:
● Maximum regenerative discharge power capacity:
● Maximum extra discharge power capacity:
● Maximum current drain for balancing:
Balance Balance Charger/Discharger Charger/Discharger
Balance Charger/Discharger Charger/Discharger
Features Features Features
1.47kg
210.0×140.1×80.2 ±0.5mm
9.0—50.0VDC
<65A
70A@Syn. Mode
2000W (Channel 1400W @input > 23.5V)
200W (Channel 130W)
2000W (Channel 1400W)
3200W (Channel 1600W @40V/40A)
2.4A@Syn. Mode
- 4 -
4010DUO 4010DUO
4010DUO 4010DUO
40A@Asyn. Mode
1.2A@Asyn. Mode