iCharger 4010DUO User Manual page 36

iCharger iCharger Synchronous Synchronous
iCharger iCharger Synchronous Synchronous Balance
29XX
"Balance not needed, Remove connection from balance
port"
30XX
"Balance required!"
31XX "Auto detect the number of cells failed, please connect
balance or set cells"
32XX
"AD watchdog error"
33XX
"Synchronous mode: Channel outputs imbalance"
34XX "This channel is needed to access the resistor or bulb
load"
35XX
"The other channel is occupied"
Balance Balance Charger/Discharger Charger/Discharger
Balance Charger/Discharger Charger/Discharger
- 36 -
Balance port error, Ni-, Pb don't need
balance port, but voltage of balance
port is detected
Balance port is out plugged
AD watchdog error
Channel outputs are imbalance in
Synchronous mode
This regenerative channel is needed
to access the resistor or bulb load
The other channel is occupied
4010DUO 4010DUO
4010DUO 4010DUO