iCharger 4010DUO User Manual page 12

iCharger iCharger Synchronous Synchronous
iCharger iCharger Synchronous Synchronous Balance
● ● ● ● Program Program Program Program Edit Edit Edit Edit
After adding new program or editing saved program, system will enter MEMORY SETUP interface, users can set or
modify the program on this interface.
1
5
Note:1.When editing program name, the character can be selected by turning Knob
Knob Knob Knob to confirm the selected character, and clicking TAB/SYS Knob
the program name is empty, the system will name automatically.
2.If the Editing program is the built-in program, program name and the types of battery
parameters cannot be changed.
After setting the basic parameters of battery, click "
" " to return MEMORY SETUP , and click "
Note: 1. Channel Mode has asynchronous, synchronous available, see more details in Page31
Important Important
Important Notes Important
2. If select synchronous mode, the maximum current setting will change from 40A to 70A.
3. For built-in program, the Auto save before the program runs option is ticked by default.
■ ■ ■ ■ LiXX LiXX Battery Battery Charge/Discharge Charge/Discharge
LiXX LiXX Battery Battery Charge/Discharge Charge/Discharge Setup
After adding program, it will switch to LiXX battery in Type option on the MEMORY SETUP interface, and set the
number of cells and capacity , if not setting for the number of cells, the charger will set Auto by default, after editing
all parameters for program, click "
As shown in above picture, the program of LiPo, LiIo, LiFe battery has: Charge, Storage, Discharge, Cycle and
Balance Only.
Balance Balance Charger/Discharger Charger/Discharger
Balance Charger/Discharger Charger/Discharger
Notes Notes
Notes.
Setup Setup
Setup
" to save and return to the previous interface.
MEMORY SETUP Interface
2
1: Program name
3
3: Number of cells
4
4: Battery capacity
TAB/SYS button to delete the character;If TAB/SYS TAB/SYS
"
to enter MEMORY OPTION interface, after setting click
" to save.
MEMORY OPTION Interface
Channel Mode:
Run Counter:
Log Interval:
- 12 -
4010DUO
4010DUO
2: Types of battery
5: Available program
Knob Knob , , , , and clicking the Knob
Asynchronous (default);
Synchronous
0-999; default: 0
0.5-60Sec; default: 1Sec
4010DUO
4010DUO