Calibration - iCharger 4010DUO User Manual

iCharger iCharger Synchronous Synchronous
iCharger iCharger Synchronous Synchronous Balance

⑦ Calibration

Calibration Calibration Calibration
Select SYSTEM MENU→Charger Setup→Calibration to enter the setup interface.
If users select User Calibration , the User Calibration option changes to active status; then select channel to enter the
interface to calibrate.
Note: User Calibration has CH-X Channel Calibration and Other Variables Calibration two options,
users can calibrate charger for one channel alternatively. If users select User Calibration , the
corresponding message will appear in the interface after booting the charger, as shown in the
right picture above.
Select CH-1/2 Channel Calibration to enter the channel calibration interface, Select Other Variables Calibration to
enter the other variable calibration; after Calibration, click "
" " to load default value.
Balance Balance Charger/Discharger Charger/Discharger
Balance Charger/Discharger Charger/Discharger
- 23 -
Calibration Setup Interface
Manufacturers Default: Default value
User Calibration: User calibration
The user calibration may lead to large data deviation,
and affecting the normal use; user calibration for
charger is not recommended.
" to save and return to the previous interface; click
4010DUO 4010DUO
4010DUO 4010DUO