iCharger 4010DUO User Manual page 15

iCharger iCharger Synchronous Synchronous
iCharger iCharger Synchronous Synchronous Balance
②LiXX
LiXX Battery LiXX LiXX Battery Battery Storage Battery Storage Storage Setup Storage
This mode is for storaging LiXX battery that is not to be used for an extended period. The charger determines whether
to charge or discharge the battery based on the configured target voltage. If the battery voltage exceeds the target
storage voltage it will start to discharge, while lower than the target storage voltage it will start to charge.
Select Program→Storage to enter Storage setup interface.
Note:1. Accelerated storage: accelerated storage via internal resistance correction. Tick Accelerated
storage to accelerated storage.
2. Storage Compensation is the compensation for the battery voltage fallback: for storage charge,
the actual storage voltage=Storage Cell Voltage + Storage Compensation; for storage discharge,
the actual storage voltage=Storage Cell Voltage - Storage Compensation.
③LiXX
LiXX LiXX Battery Battery Discharge Discharge
LiXX Battery Battery Discharge Discharge Setup
Select Program→Discharge to enter Discharge setup interface.
Note: 1.The charger first discharges with constant current (CC) according to the user setting then
turns to constant voltage (CV) when reaches the discharged voltage. In the CV phase the
current gradually falls, and the charger will terminate discharging when the current falls
below than percent of the configured discharge current.
For example: the default value of Discharge Current is 2A, the default value of End
Current is 50%: End Current=2A*50%=1A.
2. Regenerative mode has OFF, To input, To channel three modes available, see more details
in Page32 Important
When switch to To channel on Regenerative Mode , "
channel setup interface, after setting click "
Note: This setting is mainly in charge of controlling the regenerative voltage and current, to prevent the
charger from being damaged by regenerative charge.
Balance Balance Charger/Discharger Charger/Discharger
Balance Charger/Discharger Charger/Discharger
Setup Setup Setup
Setup Setup
Setup
Important Notes Important Important Notes. Notes Notes
" to return to the previous interface.
Storage Cell Voltage
Storage Compensation :
LiXX Battery Discharge setup
Discharge Current:
Discharge Voltage :
End Current :
Regenerative Mode:
"button changes to the operational state, click to enter To
LiXX Battery LiXX LiXX LiXX Battery Channel Battery Battery Channel Channel Channel Regenerative
Channel Join:
Voltage Limit:
Current Limit:
- 15 -
:3.7V/Cell-3.9V/Cell;
Default: 3.85V/Cell
0V/Cell-0.2V/Cell;
Default: 0.01V/Cell
0.05A-40A; default: 2A
3V/Cell-4.1V/Cell;
Default: 3.5V/Cell
1%-100%; default: 50%
OFF (default),
To input, To channel
Regenerative Regenerative Setup Regenerative Setup Setup Setup
Not available
0.1V-40V; default: 12V
0.05A-40A; default: 1A
4010DUO 4010DUO
4010DUO 4010DUO