Pulse Measurement - iCharger 4010DUO User Manual

iCharger iCharger Synchronous Synchronous
iCharger iCharger Synchronous Synchronous Balance
Select the test mode and go to the following corresponding interface.
Liner Test
When turning the knob, the pointer
deflects with step of 10us, and the
servo responds accordingly.
Speed Test
Test Test
Click Test Test to read the test curves
and test results.
③Pulse
Pulse Pulse Measurement Measurement

Pulse Measurement

Measurement
Select SYSTEM MENU→Extra Function→Pulse Test to enter the pulse test interface, only J2 J2 J2 J2 port supports the input
signal of Pulse Measurement.
Balance Balance Charger/Discharger Charger/Discharger
Balance Charger/Discharger Charger/Discharger
- 25 -
Fixed Point Test
When turning the knob, the pointer
deflects among each setting values,
and the servo responds accordingly.
Auto CW/CCW Test
Click Test Test Test button then the pointer Test
deflects the setting times at a set rate
back and forth among each setting
values, and the servo responds
accordingly.
4010DUO 4010DUO
4010DUO 4010DUO