Selecting A Channel - Icom IC-F1000D Operating Manual

2
BASIC OPERATION

Selecting a channel

There are several types of channel selections.
Methods may differ, depending on the presetting.
Ask your dealer for details.
NON-ZONE TYPE:
To select the desired operating channel:
Rotate [ROTARY SELECTOR].
Â
Push one of [MR-CH 1] to [MR-CH 4].
Â
Push [Prio A], [Prio B], [Prio A (Rewrite)] or [Prio B
Â
(Rewrite)].
AUTOMATIC SCAN TYPE:
Channel setting is not necessary for this scan
type. When turning ON the power, the transceiver
automatically starts scanning. Scanning stops when a
signal is received.
2-2