Icom IC-F1000D Operating Manual page 7

1
PANEL DESCRIPTION
DTMF AUTODIAL
Push to transmit the preset DTMF code.
CALL
Push to transmit a 2-Tone or 5-Tone in the operating
channel.
CALL A (CODE 1)/CALL B (CODE 2)
(only for the analog mode operation)
While in analog mode operation, push to transmit a
2-Tone code as station code, that is set in the channel
1 (Code A) or channel 2 (Code B).
CALL A (CODE 30)/CALL B (CODE 29)
(only for the analog mode operation)
While in analog mode operation, push to transmit a
5-Tone code as the station code, that is set in the
channel 30 (Code A) or channel 29 (Code B).
EMERGENCY
Hold down for the set time period* to turn ON the
Â
Emergency function.
• T he countdown for the Emergency call transmission
starts. After the countdown, an Emergency call is
automatically transmitted once, or repeatedly*.
During the first countdown, hold down for the set
Â
time period* to cancel the Emergency function.
*Depending on the presetting. Ask your dealer for details.
SURVEILLANCE
Hold down for 1 second to turn ON the Surveillance
Â
function.
Push to turn OFF the Surveillance function.
Â
When this function is turned ON, the beep is not
heard and the LED indicator does not light, even when
a signal is received, or a key is pushed.
SIREN
Hold down for 1 second to emit a siren sound.
Â
• T his function can be used for situations other than an
Emergency alert, such as a security alarm.
Turn OFF the transceiver power to stop the siren
Â
sound.
// only for the LMR model //
// only for the PMR model //
ENCRYPTION
Hold down for 1 second to turn ON the Encryption
Â
function.
Push to turn OFF the Encryption function.
Â
ANNOUNCE
Push to turn the Channel Announce function ON or
OFF.
When this function is turned ON, the transceiver
announces the position of [ROTARY SELECTOR].
CALL ALERT
Hold down for 1 second to transmit a Call Alert.
STATUS
Hold down for 1 second to transmit a Status call.
1-5
(only for the digital mode operation)
(only for the digital mode operation)
(only for the digital mode operation)