Setting The Microphone Gain - Icom IC-F1000D Operating Manual

5
USER SETTINGS

Setting the microphone gain

Adjust the microphone gain.
Higher values make the microphone more sensitive to
the user voice.
NOTE:
You should turn ON the Beep function (p. 5-2)
before you start setting the microphone gain.
1) Rotate [VOL] to turn OFF the transceiver power.
2) Set [ROTARY SELECTOR] to Channel 16.
3) While holding down [Upper], rotate [VOL] to turn
ON the power and enter the microphone gain
adjustment mode.
4) Push [Upper] to increase, or push [Lower] to
decrease the microphone gain.
• T he adjustable range is 1 (minimum) to 4 (maximum).
• A beep sounds after pushing [Upper] or [Lower]. An
error beep sounds if you try to exceed the adjustable
range.
5) Rotate [VOL] to turn OFF the power to exit the
microphone gain adjustment mode.
[ROTARY SELECTOR]
[Upper]
[Lower]
5-5
[VOL]