Desktop Or Shelf Mounting - Brocade Communications Systems FWS648G-POE Hardware Installation Manual

2
Installing a redundant power supply
FIGURE 19
3. If installing multiple redundant power supplies, mount them in the rack one below the other, in

Desktop or shelf mounting

1. Attach the four adhesive feet to the bottom of the first redundant power supply. Refer to
FIGURE 20
2. Set the power supply on a flat surface near an AC power source, making sure there are at least
22
DRAFT: BROCADE CONFIDENTIAL
Installing the redundant power supply in a rack
any order.
Figure 20.
Attaching the adhesive feet
5.08 cm (2 inches) of space on all sides for proper air flow.
L in k
A c t
iv it y
1
2
3
4
F a n
T h e
rm a
l P o
w e r
Brocade FastIron WS Hardware Installation Guide
53-1002188-01