Replacing The Brake Pads; Front Brake; Rear Brake - PEUGEOT Satelis 500 Workshop Manual

SERVICE OPERATIONS

Replacing the brake pads

Front brake.

Note: This operation shall be carried out on
each side. Do not push back the pis-
tons if the 2 calipers have been
removed.
- Remove the brake pad pin cap. (1)
- Remove the brake pad pin. (2)
- Remove the brake pads.
Mini. thickness: 1.5 mm.
- When refitting the brake pads, push the
pistons all the way into their housing.
After refitting, actuate the brake levers
several times to bring the brake pads
against the brake disc.
- Carry out the same operation for the RH side

Rear brake.

- Remove the exhaust muffler trim. (3 screw)
50
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
2
1