Removal Of The Fuel Filter; Brake Inspection; Replacing The Brake Pads - PEUGEOT Kisbee Workshop Manual

SERVICE OPERATIONS

Removal of the fuel filter

- Remove the splash guard. See:
Procedure 2. page 20.
- Empty the reservoir.
- Disconnect the fuel supply hose (1).
- Disconnect the vacuum hose (2).
- Loosen the collar (3).
- Remove the vacuum-operated cock (4).

Brake inspection

- If one of the 2 brake pads is worn down to
the minimum dimensions (A), the 2 brake
pads must be changed.
A. Mini. thickness: 1.5 mm.

Replacing the brake pads

- Remove the calliper (2 screw).
Tightening torque: 27-32 Nm.
36
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
3
4
2
1
A = 1.5mm