PEUGEOT Satelis 500 Workshop Manual page 73

- Remove the linkrod-to-engine connecting
pin. (4)
- Remove the linkrod-to-frame connecting
pin. (5)
- Remove the linkrod connecting pin. (6)
- Check the condition of the spacers and
needle bearings. (7)
- Make sure that the silent block is not
cracked. (8)
Note: We recommend greasing all needle
bearings when refitting these parts.
- When re-installing, fit the rubber bushings
with the colours shown:
A. Black
B. Grey
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
MISCELLANEOUS OPERATIONS
5
4
6
7
8
A
B
2
8
71