PEUGEOT Satelis 500 Workshop Manual page 40

BODY PANELS
- Separate the front shield panel from the rear
shield panel in order to reach the bracket that
connects the rear shield panel to the
footboard. (A)
- Pull upwards the lower part of the shield panel
in order to separate it from the footboard.
- Relove the eyelet (B) from the shield panel
and the eyelet (C) from the instrument cluster
fairing in order free the rear shield panel.
- Topple the rear shield panel while separating
it from the footboards in order to reach the
header tank and the accessory plug.
- Remove the header tank. (Right side).
- Disconnect the accessory plug. (Left side).
- Remove the rear shield panel.
38
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
A
C
B