Body Panels; Cycle Part; Standard - PEUGEOT Satelis 500 Workshop Manual

Body panels

Front mudguard
Handlebar cover
Front shield panels
Rear shield
Bottom panel
Floor panel
Saddle storage compartment
Rear panels
Grab handle
Rear mudguard

Cycle part.

Front wheel spindle
Rear wheel bolt
Rear wheel spindle nut
Linkrod to engine pivot
Linkrod to frame pivot
Linkrod connecting pin
Linkage torque arms
Shock absorber top mount
Shock absorber bottom mount
Exhaust to cylinder head mounting nut
Exhaust to casing mounting bolt
Exhaust system strap
Exhaust clamp
Centre stand holder
Suspension arm
Lambda sensor
Upper cone (in 2 operations)
Upper cone locknut
Steering locknut
Front brake caliper
Rear brake caliper
Front brake disc
Rear brake disc
Handle bar

Standard

Nut and bolt 5 mm diameter
Nut and bolt 6 mm diameter
Nut and bolt 8 mm diameter
Nut and bolt 10 mm diameter
Nut and bolt 12 mm diameter
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
TIGHTENING TORQUES
0.8 to 1.2 m.daN
0.2 to 0.4 m.daN
0.2 to 0.4 m.daN
0.2 to 0.4 m.daN
0.2 to 0.4 m.daN
0.4 to 0.6 m.daN
0.8 to 1.2 m.daN
0.2 to 0.4 m.daN
2 to 2.5 m.daN
0.4 to 0.6 m.daN
6.5 m.daN
2.5 m.daN
13.5 m.daN
8 m.daN
8 m.daN
8 m.daN
3.8 m.daN
4.5 m.daN
4.5 m.daN
2.2 m.daN
2.2 m.daN
1.8 m.daN
1.8 m.daN
2.2 m.daN
2.8 m.daN
4.5 m.daN
4/2.2 m.daN
Hand tightened
7.5 m.daN
2.5 m.daN
2.5 m.daN
3 m.daN
3 m.daN
4 m.daN
0.6 m.daN
1 m.daN
2.2 m.daN
3.5 m.daN
5.5 m.daN
13