Replacing The Brake Pads; Front Brake; Rear Brake - PEUGEOT Geopolis 250 Workshop Manual

SERVICE OPERATIONS
- Loosen the lock nut of the rocker
adjustment screw. (1)
- By means of feeler gauges, adjust the
clearance of every valve by acting on the
rocker set screw.
Clearances:
• 10/100 at the intake.
• 15/100 at the exhaust.
- Immobilize the rocker set screw.
- Tighten the locknut without altering the
adjustment.
- Check the adjustment.

Replacing the brake pads

Front brake

- Remove the 2 spindles (1). (or 1 spindle and
1 pin in the ABS/PBS version).
- Remove the calliper. (2 screw).
- Remove the brake pads.
Mini. thickness: 1.5 mm.
- When refitting the brake pads, push the
pistons all the way into their housing.
Note: After refitting, actuate the brake
levers several times to bring the
brake pads against the brake disc.

Rear brake

- Remove the 2 spindles (2). (or 2 spindles in
the ABS/PBS version.
- Remove the calliper. (2 screw).
- Remove the brake pads.
Mini. thickness: 1.5 mm.
- When refitting the brake pads, push the
pistons all the way into their housing.
Note: After refitting, actuate the brake
levers several times to bring the
brake pads against the brake disc.
30
Reproduction ou traduction, même partielle, interdite sans autorisation écrite de Peugeot Motocycles
1
1
2