Removal Of The Lambda Sensor; Removal Of The Regulator - PEUGEOT Satelis 500 Workshop Manual

MISCELLANEOUS OPERATIONS

Removal of the lambda sensor

- Remove the RH fairing. See: Procedure 3.
Page: 32.
- Disconnect the lambda sensor.
- Using a box-end wrench, remove the
lambda sensor.
Tightening torque: 2.5 m.daN
Note: When reinstalling, lubricate the
threads (A) of the sensor with gra-
phite grease.
In order not to damage the Lambda sensor, never lubricate or clean the end piece (B) which is
exposed to the exhaust gas.

Removal of the regulator

- Remove the RH footboard. See: Procedure 6.
Page: 34.
- Disconnect and remove the regulator. (1)
68
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
A
B
1