Draining The Relay Box - PEUGEOT Satelis 500 Workshop Manual

SERVICE OPERATIONS
- Lubricate the rubber seal of a new oil filter.
- Using a facom D155 type oil filter notched
cap wrench, install the oil filter.
Tightening torque: 1.4 m.daN.
- Fit the drain plug.
Tightening torque: 2.5 m.daN.
- Fill the engine with 1.7 L motor oil through
the filler hole.
- Fit the filler cap.
- Start the engine, let it run for a few minutes
and then stop it.
- Remove the filler cap and wipe up the oil.
- Fit and screw the cap home.
- Remove the engine's oil filler cap.
- Check the oil level by using the marks on the
filler cap.
A. Oil level high.
B. Oil level low.
- Add oil if necessaire.
Note: Check the level with the machine par-
ked on its centre stand, on level
ground.

Draining the relay box.

- Remove the relay box filler cap. (1)
42
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
A
B
1