Removal Of The Engine - PEUGEOT Satelis 500 Workshop Manual

MISCELLANEOUS OPERATIONS

Removal of the engine

Note: To remove the cylinder head, remove
the power propulsion unit.
For removal of the cylinder head, cylinder
and piston, see the workshop
manual: 4 stroke engine. 4 valves.
Reference: 759533.
- Remove the storage compartment. See:
Procedure 4. Page: 33.
- Remove the footboards. See: Procedure 6.
Page: 34.
- Remove the bottom panel.
- Remove the battery bracket. See:
Procedure 9. Page: 40.
- Disconnect the lambda sensor. (1)
- Remove the exhaust assembly.
- Remove the intake silencer. (2)
- Remove the rear mudguard. (3)
- Remove the screw that secures the wiring
harness clamp and the fuel hose anchor
bracket. (A)
- Disconnect:
• The fuel injector. (4)
• The throttle box. (5)
• The temperature sensor. (6)
• The magneto. (7)
• The engine ground. (8)
• The suppressor.
- Disconnect the injector fuel feed hose. (9)
72
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
2
3
7
9
6
1
8 5
A
4