Firmware Upgrade; Introduction; Method 1: Firmware Upgrade Using Usb Plug-In (Recommended); Overview - FutureLogic GEN3 Evolution Operator's Manual

Hide thumbs Also See for GEN3 Evolution:
Table of Contents

Advertisement

8 Firmware Upgrade

Introduction

There are two methods to upgrade the printer firmware:
·
(Recommended) Method 1: USB plug-in firmware upgrade. Use a USB plug-in (thumb) drive
formatted with the FAT-32 filesystem. Most firmware versions are upgradeable this way.
·
Method 2: FLDFU™ upgrade program. Use the printer's USB cable and the FLDFU program to
upgrade the printer firmware from a PC or laptop.
Either method allows the printer to remain in the machine, or use the following on a test bench:
Item (FL Part Number)
RS232 Evaluation Cable
(P/N 150-00013-100)
24Vdc Power Supply
(P/N 350-00199-100)
Note: Printer firmware and the FLDFU program are available for download:
http://www.futurelogic-inc.com/support/firmwareRequest/
Additionally, you can request manufacturer-specific firmware from the game manufacturer.

Method 1: Firmware Upgrade using USB Plug-in (Recommended)

Overview

To use this method, you will need:
Item
USB A-socket to mini
adapter cable
USB drive
FutureLogic firmware file
Firmware Control File
(FWUpgradeCtrl)
Note: FWUpgradeCtrl does not have a file extension such as .TXT. To save in Windows, set
Save as type to All Files. It may also be necessary to switch off the Hide extensions for known
file types in Windows Folder Options.
ã 2011 – 2014 FutureLogic, Incorporated. All Rights Reserved.
This cable powers the printer from a 24Vdc source and provides a
connection to a standard DB9 RS232 COM port.
Recommended
Connects to Firmware Upload Port.
Format this drive to the FAT-32 filesystem. This drive contains the
firmware and control file that the printer uses to detect if an
upgrade is necessary. The USB drive plugged into the Firmware
Upload Port automatically upgrades the firmware.
The firmware file has a file extension of .DFU / .SHA / .BIN (for
example, 3RXXX123.DFU)
The printer uses the control file to identify and control the firmware
upgrade. This required file is necessary for the upgrade procedure.
Operators and Technicians Manual
Description
Description
MNL Page 20 04/10/2014
MNL-000067 REV.X03

Advertisement

Table of Contents
loading

Table of Contents