D-Link DES-3226L Reference Manual page 79

DES-3226L Layer 2 Fast Ethernet Switch User's Guide
download
Description This command is used to download a new
firmware or a switch configuration file from
a TFTP server.
Parameters firmware − Download and install new
firmware on the switch from a TFTP server.
configuration
configuration file from a TFTP server.
<ipaddr> − The IP address of the TFTP
server.
<path_filename> − The DOS path and
filename
configuration file on the TFTP server. For
example, C:\3224tgr.had.
unit [all|<unitid>] − All specifies all units
(switches), <unitid> is the unit id of the
switch that will receive the download.
increment − Allows the download of a
partial switch configuration file. This allows
a file to be downloaded that will change
only the switch parameters explicitly stated
in the configuration file. All other switch
parameters will remain unchanged.
Restrictions The TFTP server must be on the same IP
subnet as the switch. Only administrator-
level users can issue this command.
Example Usage:
−
Download a
of the firmware or
79
switch
switch