D-Link DES-3226L Reference Manual page 173

DES-3226L Layer 2 Fast Ethernet Switch User's Guide
enable igmp_snooping
Purpose Used to enable IGMP snooping on the
switch.
Syntax enable igmp_snooping
{forward_mcrouter_only}
Description This command allows you to enable IGMP
snooping
forward_mcrouter_only is specified, the
switch will forward all multicast traffic to
the multicast router, only. Otherwise, the
switch forwards all mulitcast traffic to any
IP router.
Parameters forward_mcrouter_only − Specifies that the
switch should forward all multicast traffic
to
Otherwise, the switch will forward all
multicast traffic to any IP router.
Restrictions Only administrator-level users can issue
this command.
Example Usage:
To enable IGMP snooping on the switch:
DES-3226L:4#enable igmp_snooping
Command: enable igmp_snooping
Success.
DES-3226L:4#
on the
a multicast-enabled
173
switch. If
router only.