D-Link DES-3226L Reference Manual page 115

DES-3226L Layer 2 Fast Ethernet Switch User's Guide
show stp ports
port group STP configuration.
Syntax show stp ports <portlist>
Description This
current per-port group STP configuration.
Parameters <portlist> − Specifies a range of ports to be
configured. The port list is specified by
listing the beginning port number and the
highest port number of the range. The
beginning and end of the port list range are
separated by a dash. For example, 3 would
specify port 3. 4 specifies port 4. 3-4
specifies all of the ports between port 3 and
port 4 − in numerical order.
If no parameter is specified, the system will
display all STP ports information.
Restrictions None
Example Usage:
To display STP state of port 1-9:
DES-3226L:4#show stp ports 1-9
Port Connection State
---- ---------------- ----------- -----
1 Link Down Enabled 19
2 Link Down Enabled 19
3 Link Down Enabled 19
4 Link Down Enabled 19
5 Link Down Enabled 19
6 Link Down Enabled 19
command displays the
Cost Priority Status
---------- --------------- ------------
128 Forwarding
128 Forwarding
128 Forwarding
128 Forwarding
128 Forwarding
128 Forwarding
115
switch's
STP Name
s0
s0
s0
s0
s0
s0