D-Link DES-3226L Reference Manual page 143

DES-3226L Layer 2 Fast Ethernet Switch User's Guide
Command Parameters
config vlan_mode [802.1q | port_based]
Each command is listed, in detail, in the following sections.
create vlan
Purpose Used to create a VLAN on the switch.
create vlan <vlan_name> {tag
Syntax
<vlanid>|advertisement [enable|disable]}
Description This command allows you to create a VLAN
on the switch.
Parameters <vlan_name> − The name of the VLAN to be
created.
<vlanid> − The VLAN ID of the VLAN to be
created, in the range of 1-4094.
advertisement
participates
protocol exchanges. If this parameter is not
set,
GARP/GVRP messages about the VLAN.
enable |disable – Specifies whether the
user wishes to enable or disable the
advertisement function for the specific
VLAN.
Restrictions Each VLAN name can be up to 32
characters. If the VLAN is not given a tag, it
will automatically allocate a VID value.
Only administrator-level users can issue
−
Specifies
normally in
the switch cannot
143
the VLAN
GARP/GVRP
send any