D-Link DES-3226L Reference Manual page 160

DES-3226L Layer 2 Fast Ethernet Switch User's Guide
Success.
DES-3226L:4#
show link_aggregation
Purpose Used
aggregation configuration on the switch.
show link_aggregation group_id <value>
Syntax
Description This command will display the current link
aggregation configuration of the switch.
<value> − Specifies the group id. The
Parameters
switch allows up to six link aggregation
groups to be configured. The group number
identifies each of the groups.
If no parameter is specified, the system will
display all link aggregation information.
Restrictions none.
Example Usage:
To show link aggregation:
DES-3226L:4#show link_aggregation
Command: show link_aggregation
Link Aggregation Algorithm = MAC-source
Group ID : 1
Master Port : 1
Member Port : 1-8
Status : Disabled
Flooding Port : 5
to display the current
160
link