D-Link DES-3226L Reference Manual page 171

DES-3226L Layer 2 Fast Ethernet Switch User's Guide
config igmp_snooping querier
sent in response to leave-group messages.
You might lower this interval to reduce the
amount of time it takes a router to detect
the loss of the last member of a group
state
switch to be specified as an IGMP Querier
or Non-querier.
Restrictions Only administrator-level users can issue
this command.
Example Usage:
To configure the igmp snooping:
DES-3226L:4#config igmp_snooping querier default
query_interval 125 state enable
Command: config igmp_snooping querier default
query_interval 125 state enable
Success.
DES-3226L:4#
config router_ports
Purpose Used to configure ports as router ports.
config router_ports <vlan_name>
Syntax
[add|delete] <portlist>
Description This command allows you to designate a
range of ports as being connected to
−
[enabled|disabled]
171
.
Allows the