Spanning Tree Commands - D-Link DES-3226L Reference Manual

DES-3226L Layer 2 Fast Ethernet Switch User's Guide
S
The spanning tree commands in the Command Line Interface
(CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
config stp maxage <value 6-40>
hellotime <value 1-10>
forwarddelay <value 4-30>
priority <value 1-65535>
fbpdu [enabled|disabled]
config stp ports <portlist>
cost | [auto <value 1-65535>]
priority <value 0-255>
state [enable|disable]
enable stp
disable stp
show stp
show stp ports <portlist>
Each command is listed, in detail, in the following sections.
PANNING
C
OMMANDS
108
9
T
REE