D-Link DES-3226L Reference Manual page 65

DES-3226L Layer 2 Fast Ethernet Switch User's Guide
create snmp group
Purpose Used to create a new SNMP group, or a
table that maps SNMP users to SNMP
views.
create snmp group <groupname 32>
Syntax
[v1|v2c|v3
[noauth_nopriv|auth_nopriv|auth_priv]]
{read_view <view_name 32>|notify_view
<view_name 32>|notify_view
<view_name 32>}
Description The create snmp group command creates a
new SNMP group, or a table that maps
SNMP users to SNMP views.
Parameters <groupname 32> − An alphanumeric name
of up to 32 characters that will identify the
SNMP group the new SNMP user will be
associated with.
v1 – Specifies that SNMP version 1 will be
used. The Simple Network Management
Protocol (SNMP), version 1, is a network
management protocol that provides a
means to monitor and control network
devices.
v2c – Specifies that SNMP version 2c will be
used. The SNMP v2c supports both
centralized and distributed network
management strategies. It includes
improvements in the Structure of
Management Information (SMI) and adds
some security features.
v3 – Specifies that the SNMP version 3 will
65