D-Link DES-3226L Reference Manual page 38

DES-3226L Layer 2 Fast Ethernet Switch User's Guide
To restart the switch:
DES-3226L:4#reboot
Command: reboot
Are you sure want to proceed with the
system reboot? (y/n)
Please wait, the switch is rebooting...
reset
Purpose Used to reset the switch to the factory
default settings.
Syntax reset {config|system}
Description This command is used to restore the
switch's
settings assigned from the factory.
Parameters config − If config is specified, all of the
factory default settings are restored on the
switch except for the IP address, user
accounts, and the switch history log.
system − If system is specified all of the
factory default settings are restored on the
switch.
If no parameter is specified, the switch's
current IP address, user accounts, and
switch history log are retained. All other
parameters are restored to their factory
default settings.
Restrictions Only administrator-level users can issue
this command.
configuration to the
38
default