D-Link DES-3226L Reference Manual page 11

DES-3226L Layer 2 Fast Ethernet Switch User's Guide
terminal emulator program (e.g., the HyperTerminal program
included with the Windows operating system) using an RS-232C
serial cable. Your terminal parameters will need to be set to:
•
VT-100 compatible
•
9,600 baud
•
8 data bits
•
No parity
•
One stop bit
•
No flow control
You can also access the same functions over a Telnet interface.
Once you have set an IP address for your switch, you can use a
Telnet program (in VT-100 compatible terminal mode) to access
and control the switch. All of the screens are identical, whether
accessed from the console port or from a Telnet interface.
After the switch reboots and you have logged in, the console
looks like this:
11