D-Link DES-3226L Reference Manual page 153

DES-3226L Layer 2 Fast Ethernet Switch User's Guide
show gvrp
Description This command displays the
<portlist> − Specifies a range of ports for
Parameters
which the GVRP statust is to be displayed.
The port list is specified by listing the
beginning port number and the highest
port number of the range. The beginning
and end of the port list range are separated
by a dash. For example, 3 would specify
port 3. 4 specifies port 4. 3-4 specifies all of
the ports port 3 and port 4 − in numerical
order.
If no parameter is specified, the system will
display the GVRP information for all ports.
Restrictions none.
Example Usage:
To display 802.1Q port setting:
DES-3226L:4#show gvrp
Command: show gvrp
Global GVRP : Disabled
Port PVID GVRP
---- -------- --------
1 1 Enabled
2 1 Enabled
3 1 Enabled
4 1 Enabled
5 1 Enabled
6 1 Disabled
7 1 Disabled
Ingress Checking
--------------------
Enabled
Enabled
Enabled
Enabled
Enabled
Disabled
Disabled
153